Silicone Rubber for Shoe Molds

Overview:

This silicone rubber, specially designed for shoe molds, is a two-component condensation-curing silicone rubber.

It consists of Part A (base) and Part B (curing agent). When mixed, the two components cure at room temperature to achieve rapid molding.

Features:

1. Excellent fluidity, easy defoaming, good release properties, and easy processing.

2. Simple operation with room-temperature curing.

3. Good heat resistance and long service life, with excellent durability for repeated molding.

4. High tensile strength and tear resistance.

Applications:

Suitable for shoe molds.

Product Model:

For detailed technical specifications, please email us at: sales@chengtairubber.com

Processing Instructions:

1. Measure the required amount of Part A into a container that is 3–4 times larger in volume. Add Part B in the specified mixing ratio by weight, and stir thoroughly until fully blended. After vacuum degassing, the mixture is ready for use.

2. The recommended operating environment is 20～25°C with 50% relative humidity. High temperature and humidity or low temperature and humidity will affect gel time and curing time. Therefore, the dosage of curing agent should be adjusted accordingly to achieve the desired result.

Storage:

To maintain product quality, store in a dry environment at room temperature (25°C), sealed in its original container.

Standard Packaging:

Available in 20kg/25kg pails or 200kg drums.