Silicone Rubber for Silicone Sheets

Overview:

This addition-curing silicone rubber for silicone sheets is a two-component liquid silicone rubber. With the proper amount of crosslinker added, it undergoes full vulcanization during heating, forming a flexible elastomer.

It consists of two components, Part A and Part B, mixed at either 10:1 or 1:1 ratio.

Features:

1. Good fluidity, easy to operate, high-temperature curing.

2. Wide operating temperature range, excellent weather resistance, aging resistance.

3. Moisture-proof, anti-slip, shock-resistant.

Applications:

Suitable for silicone sheet products.

Product Model:

For detailed technical specifications, please email us at: sales@chengtairubber.com

Processing Instructions:

1. Measure the required amount of Part A into a container that is 3–4 times larger in volume. Add Part B according to the mixing ratio of 10:1 or 1:1 by weight, and stir thoroughly until fully blended. After vacuum degassing, the mixture is ready for use.

2. At 25°C, the working time is 50–60 minutes. Cure at 80~120°C for 50–60 minutes to complete vulcanization.

3. Working and curing times can be adjusted according to customer requirements.

Storage:

To maintain product quality, store in a dry environment at room temperature (25°C), sealed in its original container.

· Avoid contact with moisture or water vapor to prevent increased viscosity or changes in working time.

· Be aware that compounds containing phosphorus, sulfur, amines, or organotin may poison the catalyst and cause incomplete curing.

Standard Packaging:

Available in 20kg/25kg pails or 200kg drums.