Silicone Rubber for Handmade Soap Molds

Overview:

This addition-curing silicone rubber for handmade soap molds is a two-component liquid silicone rubber. With the proper amount of crosslinker added, it undergoes full vulcanization during heating, forming a flexible elastomer.

It consists of two components, Part A and Part B, mixed at either 10:1 or 1:1 ratio.

Features:

1. Long working time and easy processing.

2. Excellent tear strength and flexibility.

3. Outstanding heat resistance with wide operating temperature range.

4. High reproduction accuracy with excellent resistance to deformation.

Applications:

Suitable for mold making of handmade soap products.

Product Model:

For detailed technical specifications, please email us at: sales@chengtairubber.com

Processing Instructions:

1. Measure the required amount of Part A into a container that is 3–4 times larger in volume. Add Part B according to the mixing ratio of 10:1 or 1:1 by weight, and stir thoroughly until fully blended. After vacuum degassing, the mixture is ready for use.

2. At 25°C, the working time is 20–40 minutes. Cure at 80~120°C for 30–40 minutes to complete vulcanization.

3. Working and curing times can be adjusted according to customer requirements.

Storage:

To maintain product quality, store in a dry environment at room temperature (25°C), sealed in its original container.

· Avoid contact with moisture or water vapor to prevent increased viscosity or changes in working time.

· Be aware that compounds containing phosphorus, sulfur, amines, or organotin may poison the catalyst and cause incomplete curing.

Standard Packaging:

Available in 20kg/25kg pails or 200kg drums.